Dangerous liquid detector

Parameter configuration and performance description: dedicated for the detection of flammable, explosive, corrosive liquid security inspection instrument. A quasi static computed tomography technique is used to determine the flammability and explosibility of the liquid to be tested by measuring its dielectric constant and conductivity. The detector can distinguish inflammable and explosive liquid such as liquid explosive, gasoline, acetone and ethanol from safe liquid such as water, Cola, milk and fruit juice without direct contact with liquid. When this method is used to detect the liquid, the detector is independent of the size of the container where the liquid is to be tested, and the air gap between the detector and the container does not affect the measurement result. Types of hazardous liquids to be detected: The detector can detect hazardous liquids including but not limited to: gasoline, diesel oil, kerosene, absolute ethanol, acetone, benzene, banana water, ether, dichloromethane, trichloroethene, Turpentine, toluene, xylene, Dichloroethane, n-pentane, cyclohexane, carbon disulfide, methanol, isopropanol, nitromethane, paint, thinner, hydrochloric acid, etc. . Technical parameters: A. Size: 210 × 50 × 70 mm; B. Weight: & Lt; 200G (including Battery) ; C. Supply Voltage: 3V; D. Operating Current: 270 Ma; E. Power consumption: 0.8 W; F. Detection time: 1 Second; G. Use: TEMPERATURE-5 °C-45 °C, humidity: 0-95% RH (no condensation) ; H. Maximum Wall thickness of testable container: 8 mm non-metallic Container; I. The effective distance between the detector and the side wall of the container to be tested is less than 3 mm.

Colors and styles can be customized